猫。 5eパッチパネル、 12/24/48ポート-コネクタ

包装

仕様

CAT.5e/CAT.6 PATCH PANEL

Specifications: 

• Design to mount to standard 19" rack or cabinet .
• Space saving ,high-density 1U (24 port ) .
• IDC contract material : phosphor bronze with tin plating over nickel .
• 110& krone punch down tools are available .
• Sturdy Aluminum Plate around RJ 45 Jacks .
• Phosphor bronze with 50 micro inches gold plated .
• Available with T568 A .T568 B wiring pattern and meeting the requirement of Cat 6standard .
• Color Coded TIA/EIA 568a (international) and 568b (AT&T Standard) Wiring For Easy Installation
• Termination accepts 22,24 26 AWG (0.64 ,0.5 and 0.4 )solid wires
• Meet or exceed the requirement of ANSI /TIA/EIA 568B.2

Material:

Plastic :fireself extinguish high impact plastic

Housing: PC UL94V-0

Housing: PC UL94V-0   
IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
PCB: FR4 1.6mm(0.04") thickness, 2 layers
Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area. 

KEYSTONE JACK

Specifications:

1. IDC Type: AT&T 110Type , Krone 45degree Type and Dual Type
2. CAT3: 6P4C contacts for Telephone system use
   CAT.5 Enchanced
   CAT.6

3.Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6 requirements;

   Meet TIA/EIA TSB-40;Meet ISO/IEC Generic Cabling Standard 11801;

   Meet CENELEC Generic Cabling Standard EN50173 

4.Angle: 90 Degree or 180 Degree ,Fit for loading a full STP/UTP
24(1U)/48(2U)PortsPatch Panel

Testing:

1.According to UL 1863

2.Current rating: 1.5 Amp Max.

3.Voltage rating: 150 Volts

4.Contact resistance: 20 m-ohm
5.Insulation Resistance: 500M-ohm
6.Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min

Materials:

Housing: PC UL94V-0   
IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
PCB: FR4 1.6mm(0.04") thickness, 2 layers
Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 u" to 50 u" Gold plating on contact area. 

お取引の流れ→(詳細を確認こちらをクリツク！)