| 原産地: | 中国(本土) | 銘柄: | HST | モデル番号: | HLW | タイプ: | スプライス | Type: | Splice, High Voltage | Jacket: | Rubber | Conductor Material: | Aluminum |
包装
| 包装: | 標準海値するパッキングまたはあなたの条件として |
仕様
Product Description
Features:
1 Adopt superior liquid silicone rubber from Germany, with reliable insulation and high-recovery elasticity
2 Unique Hi-K stress control material, self-recovery and pre-stretched technology allows quick easy installation without flame, special tools.
3 The product is pre-stretched on a removable core. Removal of the core after positioning the termination allows the product to shrink into position, providing a tight seal.
4 Meets IEC60502.4, GB/T12706.4, JB/T8144
5 Can be used on a wide range of cable insulations in a variety of applications
6 with constant force spring without weld
7 Awailable for indoor and outdoor.
Item | Test Item | Standard | Test Results | Remarks |
8.7/15kV Silicone Rubber cold shrinkable indoor/out door termination kit/middle joint | 1 min power frequency withstand voltage test | 45kV, 1min no flashover no breakdown | 45kV, 1min no flashover, no breakdown | OK |
Partial Discharge Test | 13kV, discharge 5pc | 13kV, discharge less than 5pc | OK | |
Heating Cycles Test in air | 3 cycles at 5th heat, 3h cooling, conductor temperature 90 to 95 during heating | Subjected to 3 cycles in air at the conductor temperature 95 | Remarked by the next test | |
Partial Discharge Test | 13kV, discharge 5pc | 13kV, discharge less than 5pc | OK | |
Lighting impulse Voltage Test | 105kV, anode and cathode each 10times, no flashover, no breakdown | 105kV, no flashover, no breakdown | OK | |
Cathode DC Test | 52kV, 15min, no flashover, no breakdown | 52kV, 15min, no flashover, no breakdown | OK | |
4h Power Frequency Withstand Voltage Test | 35kV, 4h, no flashover, no breakdown | 35kV, 4h, no flashover, no breakdown | OK |
Notes: These monitoring data test by the power of industrial electrical equipment quality and Testing Center.
Section area of the conductor (mm2)
Sectional area of the conductor (mm2) | Design sequence number |
25-50 | 1 |
70-120 | 2 |
150-240 | 3 |
300-400 | 4 |
500 | 5 |
630 | 6 |
800 | 7 |
1000 | 8 |
1200 | 9 |
1400 | 10 |
1600 | 11 |
1800 | 12 |
2000 | 13 |
Our Services
Reliable capability
It is made from imported-SiR (Silicon Rubber) with satisfying electric insulation, outstanding elasticity tracking resistance, corrosion resistance etc, as well as approved electric capability and long-term service-life. It can exert modest radial pressure upon the cable all the time to make the contact compact after installing .
Also it will expand or shrink simultaneously with the cable to avoid tip-and-run breakthrough caused by the working cable’s respiration. The stresscone and primary insulation are composite as one to ensure insulation reliable and performing safe by solving the problem of the stress concentration on the contour of the semiconductive layer.
Simple and convenient installation
By use of the special cold shrinkage technique invented by Histe Co., Ltd, one with no special training can fix it without the assistant of fire, electricity. The process is simple and labor-saving.
It is adequate for aloftwork, fieldwork and works in the combustible environment in particular, such as , coal mine, oilfield and under-well. Thus greatly reduces the quality accidents caused by improper operation.
1. Cold shrink outdoor termination tubes with built-in stress controlling cone.
2. Cold shrink tubes (for three core power cable only)
3. Cold shrink branch Pipe (for three core power cable only)
4. Galvanized waterproof copper connector (s)
5. Accessories for installation
