| 原産地: | 中国(本土) | 銘柄: | histe | モデル番号: | 磁器の終端 | タイプ: | スプライス | アプリケーション: | 高電圧 | 材料: | シリコーンゴム | 標準: | Iec60840; gb/t11017 | タイプ: | 熱収縮 |
包装
| 包装: | カートンまたは顧客の要求として |
仕様
Heat Shrinkable Tube
Heat shrinkable tube, made of radiation cross-linked polyolefin, has excellent physicochemical and electrical properties. It can reliably insulate cable and wire splices and terminations, effectively protect soldered joint and provides good mechanical protection for wire harness in electronic, communications, automotive, shipping and aircraft manufacturing industries.
Features
.Meets UL 224, CAN / CSA C22.2 NO198.1 -99
.Heat shrink ratio: 2:1
.Highly flame retardant , environmentally friendly
.Min. shrink temperature : 84 °C
.Min. full recovery temperature : 120 °C
.Continuous operating temperature : -55 °C ~ 125 °C
.RoHS Compliant
.Standard Colors: black, white, red, yellow, green, blue and other four international standard colors.
More colors are available upon request
Technical Data
| Properties | Typical data | Test method |
| Tensile strength(MPa) | ≥10.4MPa | ASTM D 2671 |
| Elongation(%) | ≥300% | ASTM D 2671 |
| Tensile strength after heat ageing (MPa) | ≥7.3MPa | 158°C×168h |
| Elongation at break after heat ageing (%) | ≥100% | 158°C×168h |
| Longitudinal change(%) | -8%~+8% | ASTM D 2671 |
| Flammability | Self extinguish in 30 sec. | AMS-DTL-23053/5 |
| Dielectric strength | ≥15kv/mm | IEC 60243 |
| Volume resistivity | ≥1014Ω.cm | IEC 60093 |
| Product Code | ID Before Shrink(mm) | ID After Shrink(mm) | Standard Length(m/roll) |
| S5-PTFE-Φ0.5 | 0.7±0.2 | ≤0.40 | 200 |
| S5-PTFE-Φ1.0 | 1.0±0.2 | ≤0.50 | 200 |
| S5-PTFE-Φ1.5 | 1.5±0.2 | ≤0.90 | 200 |
| S5-PTFE-Φ2.0 | 2.0±0.2 | ≤1.30 | 200 |
| S5-PTFE-Φ2.5 | 2.5±0.2 | ≤1.50 | 200 |
| S5-PTFE-Φ3.0 | 3.0±0.2 | ≤1.80 | 200 |
| S5-PTFE-Φ3.5 | 3.5±0.2 | ≤2.0 | 200 |
| S5-PTFE-Φ3.8 | 3.8±0.2 | ≤2.0 | 200 |
| S5-PTFE-Φ4.0 | 4.0±0.3 | ≤2.5 | 200 |
| S5-PTFE-Φ4.5 | 4.5±0.3 | ≤2.8 | 100 |
| S5-PTFE-Φ5.0 | 5.0±0.3 | ≤3.0 | 100 |
| S5-PTFE-Φ6.0 | 6.0±0.3 | ≤3.8 | 100 |
| S5-PTFE-Φ7.0 | 7.0±0.3 | ≤4.0 | 100 |
| S5-PTFE-Φ8.0 | 8.0±0.3 | ≤4.8 | 50 |
| S5-PTFE-Φ9.0 | 9.0±0.3 | ≤5.0 | 50 |
Details Pictures
1.Cable Porcelain Termination
Company Information:
1.Shijiazhuang Histe Electric Ltd., located east of Shijiazhuang High-tech Development Zone, Beijing-Zhuhai Expressway and west of Second Ring Road, is the Beijing-Shijiazhuang, Shi railway hub and the inside is very accessible. The company was founded in 1991, is the first domestic product shrink cable prefabricated annex to the manufacturers.
2.The company is the main products shrink cable annex, with an annual output of hundreds of thousands of sets of production capacity, the product imported fire retardant silicone rubber works mainly raw materials, the country’s leading rubber, chemical, power grid experts from developed lasted seven years, with the national patent on the basis of production, which filled a prefabricated cold annex to the blank, the national electricity company in Wuhan High Voltage Test Institute, the National Insulator arrester for Quality Supervision and Inspection Center, according to GB 11033-89. GB5598. GB5892-1991, JB/T8952-1999 detection, all targets were met or exceeded the national standard.
3.Ten years ago, my company for the state power grid construction and transformation of the millions of pieces of Annex sets cable products and other distribution network distribution products. In 1998 the Secretary will fully developed 500kV and below composite insulators, 35 KV and below MOA, isolation switch, dro-Fuse substation mother Pipe , sheds, cable Layer Protection (box), through-the-wall casing and other electrical products, products from the realization of low pressure to high pressure, UHP; from a single diversified development to the historic leap reflects the company"s focus on the future, and supporting service users, the master plan for electricity , railway, petroleum, coal, and large enterprises such as the safety of electricity to make a new contribution.
Welcome to contact with us!
