| 原産地: | 中国(本土) | 銘柄: | dicore | モデル番号: | dhsss | タイプ: | スプライス | 色: | 明確な、 赤、 青、 黄色 | 収縮率を: | 3:1 | 材料: | pe | ブランド: | dicore | 原産国: | 中国 | タイプ: | ピース- 1設計のコネクタ | モデル: | dhsss | 特徴: | 良好なインストール |
包装
| 包装: | ネゴシエート |
仕様
clear insulation heat shrink solder wire connector
Model: DHSSS
Description
DuraSeal Heat Shrink Solder Splices is One piece design,it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation easily and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube,it’s very convenience to use the exact wire dimension.
Features:
>Shrinking ratio 3:1
>Wataproof for wiring splices
>Transparent sleeve provides precise inspection
> High Tensile Strength
>Easy control soldering process
Operating Termperature Range:
>Operating Temperature : -55~125
>Fully Recovery Temperature : 130
>Temperature of fully solder melt : 150
PROPERTY
Item | Value |
Temperature Application Range | -55~125(Butt Joint) |
Shrinking Temperature | >115 |
Dielectric strength | 1KV |
Protection Type | IP 67 |
Specification
Model |
Color | Before Shrinking(mm) | After Shrinking(mm) | Solder Ring | Length (L) | ||||
ID (a) | Thick (b) | ID | Thick | ID (c) | Thickness (d) | Length (e) | |||
DHSSS-1 | Clear | 2.0±0.1 | 0.30±0.05 | 1.1±0.1 | 0.50±0.05 | 1.8±0.1 | 0.3±0.05 | 2.0±0.1 | 40±0.5 |
DHSSS-2 | Red | 3.2±0.2 | 0.38±0.05 | 1.5±0.1 | 0.55±0.05 | 2.9±0.1 | 0.45±0.05 | 2.5±0.1 | 40±0.5 |
DHSSS-3 | Blue | 5.0±0.2 | 0.40±0.05 | 2.6±0.1 | 0.78±0.05 | 4.6±0.1 | 0.48±0.05 | 2.5±0.1 | 40±0.5 |
DHSSS-4 | Yellow | 6.5±0.2 | 0.40±0.05 | 3.0±0.1 | 0.80±0.05 | 6.2±0.1 | 0.5±0.05 | 3.5±0.1 | 40±0.5 |
