原産地: | 中国(本土) | 銘柄: | hightek | モデル番号: | Hu-01 |
グレード: | 工業用 | マスターチップ: | 英国ftdiチップ | ボーレート: | 300-921.6kbps |
伝送媒体: | ツイスト- ペアケーブルまたはシールドケーブル。 | 伝送距離:: | 5メートル | 動作環境: | -25イン℃から70イン℃、 |
相対湿度: | 5%95%に | サポート: | 15.windows95/98/2000/7/8/xp/vista/linuxとimag | パワー: | 16.両方バスと外部電源がサポートされてい |
包装
包装: | カラーボックス |
仕様
I. Summary
With rapid development of computer industry, USB is taking the place ofvarious kinds of traditional low speed peripheral interfaces. However, RS-232interface designs are still used in many of the important facilities undercurrent industrial environment; therefore, converter is used by many users toimplement the data transmission from USB of a computer to RS-232 equipment.
HighTek HU-01 is a universal USB/RS-232 interface converter. No external powersupply needed. Compatible with USB and RS-232 standards, HU-01 iscapable to perform the conversion from single-ended USB signal into UARTsignal of RS-232. DB9 male connectors are used for connection from RS-232interface. The unique I/O circuit of the internal zero delay auto transceivercontained in the converter controls the data stream direction automatically.
The converter is plug-and-play. All these features ensure a universalapplication on all the existing communication software and hardware interfaces.
The data communication rate can be as high as 300-921.6Kbps by the point-to-pointcommunication by HU-01 interface. Power indicator light and datatraffic indicator light are also available with the converter for malfunctionindication. Conversion fromUSB to RS-232 is supported.
II. Functions
HU-01 interface converter supports the following communication mode:
1. Point-to-point communication mode.
III. Hardware installment and application
Read the user manual carefully before installing the HU-01 interfaceconverter. Put the signal cable of the equipment into the USB socket.
USB/DB9 male connectors are adopted for input/output interfaceconnection for this product.
IV. Performance parameters
- 1. Standards: conforming to USBV1.0, 1.1 and 2.0 and EIARS-232.
- 2. USB signals: VCC, DATA+, DATA-, GND and FG.
- 3. RS-232 signals: DCDRXDTXD DTR GND DSR RTS CTS RI
- 4. Industrial grade, adopt UK FTDI master chip
- 5. Working mode: asynchronous point-to-point.
- 6. Direction control: adoption of automatic data streamcontrol for automaticrecognition and control of data transmission direction.
- 7. Baud rate: 300-921.6Kbps, automatic detection of the transmission rate of theserial interface signal.
- 8. Transmission distance: 5 meters for RS-232 and less than 5 meters for USB.
- 9. Interface protection: +-15KVelectrostatic protection.
- 10. Interface forms: USB A type male connector and DB9 male connector.
- 11. Signal indication: 9 indicator lights for Power (PWR), Send (TXD) and Receive (RXD).
- 12. Transmission media: twisted-pair cable or shielded cable.
- 13. Dimensions: 1555mm*55mm*36mm.
- 14. Working environment: -40°C to 85°C , relative humidity 5%to 95%
- 15. Windows95/98/2000/7/8/XP/Vista/Linux and IMAG are supported.
- 16. Both BUS and external power supply are supported.